Network Extender on September 12, 2015 | Marketing Team Distribute Limitimer time data over a network. Use this extender to convert the timer's data signal into a TCP protocol. Use a second adapter anywhere on the LAN or WAN to capture the TCP data and convert it back to the Limitimer format to drive any connected signal light. With our free configuration software, you may configure the adapter as a server or client; give it a specific IP address; or receive an IP address via DHCP from the local router. The gateway and network mask can also be set to reach outside of the LAN. The client can also be configured to reach a specific server-configured extender on a network port. A companion application harnesses a PC's processing power to act as a server for "hundreds" of client signal lights.